|
|
Form Factor |
|
Extended ATX |
|
Dimensions |
|
12" x 13.05" (30.5cm x 33.2cm) |
|
|
|
CPU |
|
• Dual mPGA603 ZIF Sockets • Supports up to two Intel® Xeon™ processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |
|
System Bus |
|
400MHz system bus |
|
|
|
Memory Capacity |
|
• Six 184-pin DIMM sockets • Supports up to 12 GB DDR200 memory • Dual channel memory bus • Memory must be populated in pairs |
|
Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
DIMM Sizes |
|
128 MB, 256 MB, 512 MB, 1 GB, 2 GB |
|
Memory Voltage |
|
2.5 V only |
|
|
|
Chipset |
|
• Intel® E7500 chipset • MCH + ICH3-S + P64H2 |
|
SCSI |
|
Adaptec AIC-7899W Controller for Dual-Channel Ultra160 SCSI |
|
RAID |
|
Support for Zero-Channel RAID w/ Adaptec 2000S ZCR Card (Card NOT included) |
|
IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
|
Network Controllers |
|
• 1x Intel® 825446C Gigabit Ethernet • 1x Intel® 82550 10/100M Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
PCI Expansion |
|
• 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot • 2x 64-bit 100MHz PCI-X (3.3V) slots • 3x 32-bit 33MHz PCI (5V) slots • 1x SXB (Supermicro Extended Bus) slot |
|
IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
USB |
|
Up to 5 USB ports |
|
Serial Ports |
|
2 Fast UART 16550 serial ports |
|
Parallel Port |
|
1 ECP/EEP parallel port |
|
Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
| |
|
|
|
2U Chassis |
|
• SC822S-400LP • SC822R-400RC |
|
Rackmount Tower / 4U |
|
• SC742S-420 |
|
Important Note |
|
To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |
|
|
|
BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
|
BIOS Features |
|
• Plug and Play (PnP) • SMBIOS 2.3 • APM 1.2 • DMI 2.1 • ACPI 1.0 • Hardware BIOS virus protection |
|
|
|
Software / Hardware |
|
• Optional IPMI (Intelligent Platform Management Interface) 1.5 • SuperO Doctor III • Watch Dog |
|
Power Configurations |
|
• ACPI/APM Power Management • Main Switch Override Mechanism • Wake-On-Ring (WOR) header • Wake-On-LAN (WOL) header • Keyboard Wakeup from Soft-Off • CPU Fan auto-off in sleep mode • Power-on mode control for AC power loss recovery • Internal/External modem remote ring-on |
|
|
|
CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby • CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V • Adjustable CPU clock frequency ratio settings (via BIOS) |
|
FAN |
|
• Total of five 3-pin fan headers • 3x fans with tachometer monitoring • Overheat backup fan connector • Status monitor with firmware/software on/off control |
|
Temperature |
|
• Monitoring for CPU, chassis, environment • CPU thermal trip support |
|
LED |
|
• CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |
|
Other Features |
|
• Chassis intrusion detection • Chassis intrusion header • Chipkill support |
| |